Tony Huntimer's Pro-Touring 433 1968 Brutal Camaro project
AKA The RaceHome.com Camaro
SUSPENSION PICS AND INFO
New front brakes by Baer
Rear Ford brakes with a dyno hub attatched to axle -added 3/13/01
If you want to find out more info on these billet adapters: go to "TECH" section
for article on fitting BIG tires and wheels on my '68 Camaro.
Front Baer brake rotor -added 3/01/01
Vette Brakes 2 inch billet adapter -back side -added 3/01/01
Vette Brakes 2 inch billet adapter -front side -added 3/01/01
Vette Brakes adapter mounted on rotor -you can see the lug nut heads sticking out past mounting surface -added 3/01/01
Back side of wheel has relief holes for lug nut heads -added 3/01/01
Tony Huntimer's AGR steering pump
Tony Huntimer's AGR steering box
DETROIT SPEED AND ENGINEERING TUBULAR CONTROL ARMS
Detroit Speed & Engineering upper control arms with polished stainless cross-shafts -added 4/06/01
Detroit Speed & Engineering upper control arms and adjusters -added 4/06/01
Detroit Speed & Engineering upper control arms - bushing closeup -added 4/06/01
Detroit Speed & Engineering upper control arms - polished cross-shafts and hardware -added 4/06/01
Detroit Speed & Engineering upper control arms - another close-up of polished hardware -added 4/06/01
Detroit Speed & Engineering upper control arms - close-up of ball-joint area -added 4/06/01
Detroit Speed and Engineering control arm compared to stock control arm
Big Block Milodon low profile oil pan dimpled by tie rod oil zirk fitting -NOT due to new DS&E arms -added 5/10/01
Big Block Milodon low profile oil pan dimpled by tie rod oil zirk fitting closer -NOT due to new DS&E arms -added 5/10/01
Custom tie rod oil zirk fitting so the pan won't get a hole -added 5/10/01
Detroit Speed & Engineering tie rod adjuster installed -very nice! -added 5/10/01
Detroit Speed & Engineering upper control arms installed -plus brake ducting hose -added 5/10/01
Detroit Speed & Engineering upper control arms installed -Very good performers! -up close -added 5/10/01
DS&E Left front control arm installed on Tony Huntimer's Camaro -added 5/04/01
DS&E right front control arm installed on Tony Huntimer's Camaro -added 5/04/01
Brutal Camaro 275/40/17 rear tire fitment picture -added 6/10/01
Brutal Camaro rear tire fitment -Upward angle -added 6/10/01
Brutal Camaro rear finder lip rolled -upward angle -added 6/10/01
Tony Huntimer's Brutal Camaro rear tire fitment -from behind tire -added 6/10/01
Ford 9-inch and exhaust clearance -added 5/30/01
Chassis on the rack -added 5/30/01
Another shot of the car on the rack at Speed Merchant -added 5/30/01
[Home] [Speed Shops] [Machine Shops] [Fab Shops] [Race Tracks] [Tech]
[Parts Manufacturers] [Videos] [Car Clubs] [Racing Associations]
[NEW STUFF!!]
[DISCLAIMER]
Last Changed 5/25/01
E-mail: thunt@racehome.com